The X-series of Can Man is a high speed welder concept for food and/or aerosol productions of up to 650 cpm with welding speed ranging from 30-90 m/min.
QuickChange™ Fully automatic can body height change or: 2 minutes and you are ready for production again!
PowerFOIL™
The system saves up to 50% copper wire can by can using a 1 mm wire instead of a 1.38 mm. Check out the savings you'll achieve using the PowerFOIL-calculator.
XPLANE™
Simple welding roll adjustment by simply turning a single screw. That's XPLANE.
TempGuard™ This new product was invented in order to control the machine temperature, avoid „overcooling“ which results in condensation of water under humid conditions and it further saves energy (= operation costs).
Wire cooling The wire cooling is essential on high speed welders. It assures best possible welding roll performance and increases the rolls lifetime considerable.
Wire treatment As in all Can Man welders, the wire routing is among the most simple ones ever made. Compare it with any of your welders and you'll see the difference.
Redundant control Our controls are among the most reliable ever made. For the X-series we followed the market by using an easy to operate, bright and large „touch panel“, but we added some „traditional“ switches in order to guarantee the operation of the machine in all its main functions in case of a damaged or defective touch screen.
Scoring unit The integration of a scoring unit in combination with a separator allows a production of up to 1200 cans per minute, in case your complete production process requires that speed.
Handling There are no easier to handle welders in the market today than the ones from Can Man. 2 pushbuttons and you‘ll fully open the complete flexer rolling unit, lift up the blank magazine, lower the guidance channel, slide aside the body transport system and last but not least unlock and shift forward the complete calibration tool.
