|
027 How to change the battery of the Pacemaker?
=> order new battery together with the pliers
CM order No. 013310 & 013311
Here is a description how to change the battery:
1. Switch on the power supply of the Pacemaker, but not the
loading signal (emergency stop active).
2. Make a note of the orientation of the battery.
3. Pull the old battery off by holding on the shorter sides and
pulling simultaneously.
4. Position the new battery with the right orientation carefully and
press it, until it clips on. (the pin contacts are very small!)
5. Check if all parameters of the Pacemaker are correct.
6. Switch of the Pacemaker and check if the data corrupt error still
appears. It is normal that it still appears on the first switch "ON",
but later it should be disappear.
Check all parameters of the Pacemaker again.
|
