Benefits Of The X5 HVAC WeldCENTER™

Speed

With up to 60 containers per minute the X5 is the fastest HVAC – welder available today.

Easy Access

With the automatic welder X5 – HVAC a machine has entered the market which can weld exceptional formats, sheet-thickness and materials, thanks to a solid frame-construction and a state of the art control.

Economy

The connection-power is an important cost factor, especially when running heavy gauge, galvanized material. Thanks to optimized arrangement of the welding arms (PowerBAR) and the use of a frequency inverter (Pacemaker™), the electric power consumption of this welder is less than 30 Amps per phase at full load and maximum speed!

2-Wire System Incorporated & Selectable

For most HVAC – applications and rather thin material, 1 copper wire  will do the job. However the X5 – HVAC is equipped with all units to handle also 2 copper wires, which is required for heavy gauge material.

Threading 1 or 2 wires in is a “childs play” and only a selector switch has to “activate” the 2nd wire drive, which stands still when unused.

Technical Data

Metric
Imperial
Diameter range 180 - 400 mm
Height range 150 - 700 mm
Material thickness 0.24 - 0.6 mm
Production output up to 60 1/min
Format change 30 minutes
Height change 5 minutes
Welding speed 10 - 24 m/min
Wire diameter 2 x 1.5 or 1.8 mm
Electrical mains 3 x 400 VAC + N + Ground, 50 / 60 Hz
Fuse and power 3 x 32 A, 35 kVA
Water Pressure 5 bar (absolute)
Flow rate min. 40 l/min
Cooling power min. 20 kW
Air pressure and consumption 6 bar, 5 Nm3/h

Accessories

Welding roller dressing unit

Professional and exact profiling of the welding roll is an important factor for a smooth canbody production. With Can Man's dressing unit this job can be done on a high quality standard, no matter which brand of welding roll is used.

Cold pressure welder

With the cold pressure welder two ends of copper wire can be welded together if the copper wire coil is empty or after a wire break. Welding the two ends together avoids the job of re-threading the copper wire which can be a quite time-consuming job, especially on aged welders and welders of other brands because the wiring is complicated.