Benefits Of The PowerCUT™

Scratch Free Sheet Handling

Higher speed and thinner material needs higher accuracy and brilliant surfaces. The sheets are constantly guided. Drop bars, step plates, infeed fingers and chaindogs are eliminated. Magnetic conveyors ensure smooth and safe sheet, stripe and blank transport.

BIG 8 Monobloc Cutting Heads

The newly developed large sized BIG 8 cutters which are integrated in super-precise housings are regrindable and allow a height change within only a few minutes or even 0 minutes with the automatic positioning system.




Safety + Accessibility

To avoid bulky convers we have included a reliable scanner safety device with two easy to setup scanning areas to trigger a warning (pause production) or emergency stop.

Highest Quality Components

For the needed precision at every station, the framework as well as the bearing houses are made of ironcast with large wall thicknesses. High quality angle-ball bearings and P4-class spindle bearings ensure pinpoint precision. The roller cutters are made of finest-grain carbide for high durability.

80 % Trim Volume Reduction

Complicated collecting and handling of trim strips is no longer necessary. Trim cutter‘s chop the trim strips to prevent jamming. After trimming the „left overs“ are very small and can be box collected or „lead“ away.

Compatible And Extendable

The single slitter PowerCUT™ can be completed with a second cutting operation; therefore an investment in a single slitter is an absolutely worthwhile investment if the canbody production output is planned to be increased.

Technical Data

Production output up to 40 sheets/min
Sheet sizes min. 550 x 550 mm
max. 1200 x 1200 mm
Sheet thickness 0.1 - 0.4 mm
Format change (excl. cutters) 5 min
Cutter settings 8 min / classic cutter pair
2 min / BIG8 cutting head
0 min / per BIG 8 automated
Electrical mains 3 x 400 VAC + Ground, 50/60 Hz
Fuse and power 3 x 25 A, 5 kVA
Air pressure and consumption 6 bar, 8 m³/h


Digital roller cutter adjusting unit

To adjust the roller cutters precisely and within shortest time we provide a digital roller cutter adjusting unit which can be mounted on the slitter. For first and second cutting operation, depending on the type of knives you are using.

Cutter grinding

The accuracy of the cut blanks highly depends on the status of the roller cutter knives. To avoid unprecise cutting and burrs, a semiannual or annual "sharpending" of the knives is a must. Best to be done with a precise and easy to use grinding unit.

Blank measuring unit

A good can starts with a good blank. To do important offline controls we provide the blank measuring unit to ensure that cutting tolerances are kept within the lmits.

Driven roller conveyor

The driven roller conveyor can be placed in front of the slitter to place ready to be cut sheets with a forklift. The pallet is transported by a driven roller system into slitter's downstacker.
All Can Man content is now also available on the Soudronic Group website.
Where do you want to continue your journey?
All Can Man content is now also available on the Soudronic Group website.
Where do you want to continue your journey?