iPad problem: Connection to an alternative display / PC
The HMI of Can Man machines is optimized for an iPad, but as an alternative, a computer, laptop or another tablet with a browser can be used as well.
- Connect your device to the WLAN „CM_SMARTControl“. If you don’t have a Wi-Fi connection on your machine, connect a LAN cable to the router.
Note: The Wi-Fi is password protected! Contact Can Man by opening a new ticket or ask your superior.
- Open the browser. Supported browser are Safari, Chrome or Firefox.
- Enter the correct IP address:
Welder ➔ http://192.168.10.10
Welding monitor ➔ http://192.168.10.11
Slitter ➔ http://192.168.10.13
Feeder ➔ http://192.168.10.15
Note: If you use a new iPad the icons for the machine type can be produced, when you tap on “Add to home screen“ button.